Exalogic Virtual Tea Break Snippets - What Next After a Exalogic Clean Install

Having installed your Exalogic with the 2.0.1.x software you now have a fairly empty system that simply contains the Control Stack and nothing else. At this point we need to consider what your next steps should be and what we need to define and create before building you Virtual environment. This short blog will provide some recommendations for what you define / build and when based on a number of Exalogic installations. If this sequence is followed then you should have everything in place before your create your first vServer.

The key assumption of this blog entry is that you have spent time designing you virtual landscape and and know what External access etc is required for the resulting system.

Exalogic Virtual Tea Break Snippets - Importing Public Server Template

Before we can create Virtual Servers within Enterprise Manager Ops Centre (EMOC) we will need to import an appropriate Server Template that will be used to create the Virtual Server. Server templates are associated with accounts and hence may be imported on an account by account basis or for common base templates we can import them once and make them Public. Once we have configured the imported template to be Public it will be available to all accounts and users.

Serve templates can be uploaded to an account in 3 simple steps although this initial upload will make the template private to an account its properties can be set to public by simply changing the "Public" flag within the account Server Template tab. The following steps are required to import a template and make it public.

To import a template you will need to navigate to your account and select "Upload Server Template". This will initiate the Wizard below.

Exalogic Virtual Tea Break Snippets - Creating Accounts

Once we have created our Users and Networks we will want to enable the Virtual Data Centre (vDC) for access by the Cloud Users. To facilitate this we will need to create Accounts within the vDC / Cloud and allocate the users to these accounts. Once a Cloud User has been allocated to an account they will be able to access that account and hence create / manage Virtual Servers within that account / Pool.

To create an Account within a vDC / Pool you will need to be logged into Enterprise Manager Ops Centre (EMOC) with the appropriate Role, and this is generally done using you Cloud Administrator, then simply navigate to the vDC Management Accordion, vDC, your Cloud and finally Accounts.

Once you have Accounts highlighted then select "Create Account" via one of the standard methods (Right-Click, Actions or button bar) to initiate the Create Account wizard. If this is the first time you will see an Introduction screen but for subsequent execution this can be disabled. The wizard screens are displayed below.

Exalogic Virtual Tea Break Snippets - Allocating Static IP Addresses

By default once a Network has been created within the Enterprise Manager Ops Centre (EMOC) it can be allocated to vServers during their creation. At this point an IP Address will be allocated automatically from the pool of Allocated IPs associated with the Network and Account combination.

In many customer solutions the vServers will need to be allocated a specific IP address so that they can be accessed externally at a know location. To achieve this we must Allocate a number of vIPs within the range allocated to the Account. This is done on an Account by Account basis as follows.

Exalogic Virtual Tea Break Snippets - Creating Networks

In the majority or Real World scenarios we will need to access the Virtual Servers running within the Exalogic from an external client network. To facilitate this we will want to leverage the 10Gb Ethernet connection and hence we will need to create 1 or more EoIB networks that can be accessed by the Virtual Servers.

During the installation of the Exalogic 2.0.1 Virtual environment we create a single "EoIB-external-mgmt" network that we could, in theory, use to access the Virtual Servers we create. Although this is possible, assuming it has enough IP Address, this would be bad practice because this network is intended solely for management functionality and access to the Control VMs. Therefore to provide the Virtual Servers with external Ethernet access we will need to create additional EoIB interfaces. Each of these will need to be VLAN tagged to provide network isolation and partitioning.

Exalogic Virtual Tea Break Snippets - Creating Cloud Users

Creating Cloud Users and Administrators will be one of the first tasks when setting up a new Exalogic 2.1 environment. We will step through the simple process of creating users and describe a few key user types. Initially we will need to login as either the root user or the exl-admin user, that is a user with the User Admin Role.

Before adding users to the Exalogic 2.1 environment they must exist as either local users on the physical machine running the Exalogic Control Virtual Server or existing within an appropriate repository, LDAP etc, used by the machine for authentication. This is required because Enterprise Manager Ops Centre 12c (EMOC) does not store any account authorisation information instead this is left tot he underlying OS. It is assumed within this blog that this has been done.