Tuesday, 23 July 2013

Exalogic Virtual Tea Break Snippets – Simplified Exalogic IaaS Cli

In previous blogs I have built and documented a number of extensions to the standard Exalogic IaaS Cli that either simplify the Cli usage or provide additional functionality. Following feedback from the various user I have enhanced and amalgamated a number of my scripts into a new single “SimpleExCli.sh”. In addition the SimpleExCli.sh script contains a number of new options for creating and managing vServers within your Exalogic environment.

The aim of this blog entry is to introduce the new script and document the commands available providing a starting point for script usage. I will produce a number of additional short targeted tutorials that will work through the individual commands in more detail.

Replaced Blog Entries

The scripts described in the following blog entries have been amalgamated into the SimpleExaCli.sh.

SimpleExaCli.sh

Installing and Running

Because this is a wrapper around the standard Exalogic IaaS Cli to use the SimpleExaCli.sh script it need to be installed on a machine that already has the IaaS rpms installed. If they have not been installed then the following rpms will need to be installed.
  • rpm -i orcl-sysman-iaas-api-12.1.0-1629.noarch.rpm
  • rpm -i orcl-sysman-iaas-cli-12.1.0-1629.noarch.rpm
rpm -i orcl-sysman-iaas-api-12.1.0-1629.noarch.rpm
rpm -i orcl-sysman-iaas-cli-12.1.0-1629.noarch.rpm
Once the IaaS rpms have been installed the SimpleExaCli.sh can be executed using the following, general, format.
SimpleExaCli.sh <Command> <Parameters>
The Command options available and their associated Parameters will be discussed below.

Commands

--status-vservers
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • -v <vServer Name>
List the status all the vServers in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the vServers. To successfully achieve this the mandatory Username and Password must have access to all the accounts.
--start-vservers
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • -v <vServer Name>
Start all or the named -v vServer(s) in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC starting the vServers. To successfully achieve this the mandatory Username and Password must have access to all the accounts.
--reboot-vservers
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • -v <vServer Name>
Reboot all or the named -v vServer(s) in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC starting the vServers. To successfully achieve this the mandatory Username and Password must have access to all the accounts.
--stop-vservers
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • -v <vServer Name>
Stop all or the named -v vServer(s) in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC starting the vServers. To successfully achieve this the mandatory Username and Password must have access to all the accounts.
--list-vservers
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • --verbose
List all the vServers in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the vServers. To successfully achieve this the mandatory Username and Password must have access to all the accounts If --verbose is also specified the all available vServer information will be listed.
--list-vnets
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • --verbose
List all the vNets in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the vNets. To successfully achieve this the mandatory Username and Password must have access to all the accounts If --verbose is also specified the all available vNet information will be listed.
--list-distgroups
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • --verbose
List all the Distribution Groups in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the Distribution Groups. To successfully achieve this the mandatory Username and Password must have access to all the accounts." If --verbose is also specified the all available Distribution Group information will be listed.
--list-volumes
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • --verbose
List all the Volumes in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the Volumes. To successfully achieve this the mandatory Username and Password must have access to all the accounts If --verbose is also specified the all available Volumes information will be listed.
--list-templates
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
  • Optional
    • -a <Account Name>
    • --verbose
List all the Templates in the specified Account. If no Account is specified then it will loop through all Accounts within the vDC listing the Templates. To successfully achieve this the mandatory Username and Password must have access to all the accounts. If --verbose is also specified the all available Template information will be listed.
--create-vserver
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
    • -a <Account Name>
    • -v <vServer Name>
    • -vs-type <VServer Type Name>
    • -vs-template <VServer Template Name>
    • -vs-networks <Network Names>
    • -vs-ips <Network IPs>
  • Optional
    • -vs-dg <Distribution Group Name>
    • -vs-desc <Description>
    • -vs-script <Post Execution Script>
Creates a single vServer based on the information provided in the parameters. All parameters are name based and the ids will be found based on the provided name.
--delete-vserver
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
    • -a <Account Name>
    • -v <vServer Name>
Deletes a single vServer based on the information provided in the parameters. All parameters are name based and the ids will be found based on the provided name.
--stop-vserver
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
    • -a <Account Name>
    • -v <vServer Name>
Stops a single vServer based on the information provided in the parameters. All parameters are name based and the ids will be found based on the provided name.
--start-vserver
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
    • -a <Account Name>
    • -v <vServer Name>
Starts a single vServer based on the information provided in the parameters. All parameters are name based and the ids will be found based on the provided name.
--restart-vserver
Parameters
  • Required
    • -u <Account User>
    • -p <Account Password>
    • -a <Account Name>
    • -v <vServer Name>
Restarts a single vServer based on the information provided in the parameters. All parameters are name based and the ids will be found based on the provided name.
--create-assets
Parameters
  • Required
    • -f <Asset Definition File>
  • Optional
    • -remove-ssh-key
Reads the specified Asset file and creates all the assets defined within it. If multiple projects are defined these are worked through. The file is processed sequentially and therefore must contain action in an appropriate sequence. Within the Asset file each line is a specific entry and has the following structure:
Account:Action|Asset Type|Parameters
Action Asset Type Parameters
Connect
  1. Username
  2. Password
Upload ServerTemplate
  1. Template Name
  2. URL to the template location.
Create VirtualNetwork
  1. Network Name
  2. Size
Create DistributionGroup
  1. Distribution Group Name
When creating Distribution Groups from the command line they will have a size of 50,000.
Create vServer
  1. vServer Name
  2. vServer Type Name
  3. Template Name
  4. Comma separated list of network names which the vServer will connect to.
  5. Comma separated list of IPs for the specified networks. If the IP is to be assigned automatically the a "*" should be entered.
  6. Distribution Group [Optional]
  7. Description [Optional]
  8. Post Creation Script [Optional]
Create Volume
  1. Volume Name
  2. Volume Size
Attach Volume
  1. vServer Name
  2. Comma separated list of volume names
Disconnect
Production:Connect|clouduser|welcome1

Production:Upload|ServerTemplate|Navstar40GBRootTemplate|http://172.17.0.9/shares/export/common/images/ah-templates/el_40gb_root_linux_vm_template_2.0.4.0.0_64.tgz

Production:Create|VirtualNetwork|VN001|96

Production:Create|DistributionGroup|DG001

Production:Create|vServer|VS006|VSTProduction|Navstar40GBRootTemplate||EoIB1-client-access,IPoIB-vserver-shared-storage,VN001|10.242.96.69,172.17.0.34,*|DG001
Production:Create|vServer|VS003|VSTProduction|Navstar40GBRootTemplate|vServer Description|EoIB1-client-access,IPoIB-vserver-shared-storage|10.242.96.75,*

Production:Create|Volume|VS006|5

Production:Attach|Volume|VS006|VS006

Production:Disconnect
--create-template
Parameters
  • Required
    • -v <vServer Name>
  • Optional
    • -lvm <Volume Group> <Logical Volume>
    • -r <Repository Directory>
    • -w <Working Directory>
    • -d <Destination Directory>
Takes the specified vServer name and identifies the associated img files which will then be copied to a working directory before being opened and edited thus converting them to a template. If multiple images exist (because vServers uses volumes) it will be converted to a single template with multiple img files and hence larger size. This command must be executed on a physical compute node preferably cn01. The Working and Destination directories should be mounted on the ZFS and it is assumed that these will be below /u01/common/images.
--capture-vserver
Parameters
  • Required
    • -v <vServer Name>
  • Optional
    • -lvm <Volume Group> <Logical Volume>
    • -r <Repository Directory>
    • -w <Working Directory>
    • -d <Destination Directory>
    • -keep-resolv
    • -keep-hosts
    • -vs-dg <Distribution Group Name>
    • -vs-type <vServer Type Name>
Access the Exalogic EMOC system and retrieve the information about the specified vServer. This information is recorded in an Asset file that can be used with --create-assets. The script also takes the existing vServer image files and converts them into a template adding an upload to the Asset file. If the -keep-resolv flag is passed on the command line the resolv.conf within the vServer will be kept otherwise it will be re-initialised. Specifying the -keep-hosts flag indicates the hosts file within the vServer must not be initialised and hence kept as is. Because the current vServer Distribution Group is not accessible through the IaaS Cli the required Distribution Group can be passed on the command line and it will be added to the Asset file. If the capture command is being used so that a vServer can have it’s memory and/or CPU reconfigured then the -vs-type parameter will allow the user to specify a new vServer Type that will be written to the Asset file rather than the one currently associated with the vServer.

download
#!/bin/bash

################################################################################
#
# Exalogic Virtual (Linux x86-64) Simplified CLI
# HEADER START
# 
# THIS SCRIPT IS PROVIDED ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, 
# EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT 
# THE COVERED SCRIPT IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR 
# PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE 
# OF THE COVERED SOFTWARE IS WITH YOU. SHOULD ANY COVERED SOFTWARE PROVE 
# DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER 
# CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
# NO USE OF ANY COVERED SOFTWARE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS 
# DISCLAIMER.
#
# When distributing this Code, include this HEADER in each file.
# If applicable, add the following below this this HEADER, with the fields
# enclosed by brackets "[]" replaced with your own identifying information:
# Portions Copyright [yyyy] [name of copyright owner]
# 
# HEADER END
# 
# 
# Copyright 2013 Andrew Hopkinson, Oracle Corporation UK Ltd.
#
################################################################################

export OCCLI=/opt/sun/occli/bin
export IAAS_HOME=/opt/oracle/iaas/cli
export IAAS_BASE_URL=https://localhost
export BASE_IAAS_ACCESS_KEY_FILE=iaas_access.key
export BASE_KEY_NAME=cli.asset.create
export BASE_KEY_FILE=iaas_access.pub
export RUN_DATE=`date +"%Y%m%d-%H%M"`"."$$
#export RUN_DATE=$$
#CloudUser used to create vServers & Volumes
export IAAS_USER=CloudUser
export IAAS_PASSWORD_FILE=.iaas.pwd.$$
#export ASSET_FILE=CreateAssets.$$.in

ERROR_PREFIX="ERROR:"
WARNING_PREFIX="WARNING:"
INFO_PREFIX="INFO:"
CMD_MSG="About to Execute :"
LOG_FILE="SimpleExaCli.$RUN_DATE.log"

trap 'cleanAndExit' 2


function testCli() {
 echo "Testing CLI Connection"
 $IAAS_HOME/bin/akm-describe-accounts --sep "|"
}

function getAccounts() {
 accountsArray=( $($IAAS_HOME/bin/akm-describe-accounts --sep "|" | sed 's/ /_/g') )
}

function getVServers() {
 vserversArray=( $($IAAS_HOME/bin/iaas-describe-vservers --sep "|" | sed 's/ /_/g') )
}

function getNetworks() {
 vnetsArray=( $($IAAS_HOME/bin/iaas-describe-vnets --sep "|" | sed 's/ /_/g') )
}

function getDistributionGroups() {
 distGrpsArray=( $($IAAS_HOME/bin/iaas-describe-distribution-groups --sep "|" | sed 's/ /_/g') )
}

function getTemplates() {
 templatesArray=( $($IAAS_HOME/bin/iaas-describe-server-templates --sep "|" | sed 's/ /_/g') )
}

function getVolumes() {
 volumesArray=( $($IAAS_HOME/bin/iaas-describe-volumes --sep "|" | sed 's/ /_/g') )
}

function getVSTypes() {
 vsTypesArray=( $($IAAS_HOME/bin/iaas-describe-vserver-types --sep "|" | sed 's/ /_/g') )
}

function getNetworkStaticIPs() {
 staticIPsArray=( $($IAAS_HOME/bin/iaas-describe-ip-addresses --filters vnet=$NETWORK_ID --sep "|" | sed 's/ /_/g') )
}

function connectToAccount() {
 # Set run specific key information
 export IAAS_ACCESS_KEY_FILE=$ACCOUNT_NAME"."$RUN_DATE"."$BASE_IAAS_ACCESS_KEY_FILE
 export KEY_NAME=$ACCOUNT_NAME"."$RUN_DATE"."$BASE_KEY_NAME
 export KEY_FILE=$ACCOUNT_NAME"."$RUN_DATE"."$BASE_KEY_FILE
 #echo "IAAS_ACCESS_KEY_FILE=$IAAS_ACCESS_KEY_FILE"
 #echo "KEY_NAME=$KEY_NAME"
 #echo "KEY_FILE=$KEY_FILE"
 #echo "Found Account $line"
 AK=`$IAAS_HOME/bin/akm-create-access-key --account $ACCOUNT_ID --access-key-file $IAAS_ACCESS_KEY_FILE`
 KEYPAIR=`$IAAS_HOME/bin/iaas-create-key-pair --key-name $KEY_NAME --key-file $KEY_FILE`
 #echo "Connected to $ACCOUNT_NAME"
}

function disconnectFromAccount() {
 $IAAS_HOME/bin/iaas-delete-key-pair --key-name $KEY_NAME --access-key-file $IAAS_ACCESS_KEY_FILE
 $IAAS_HOME/bin/akm-delete-access-key $AK
 if [[ "$KEEP_PUB_KEY" == "" ]]
 then
 rm -f $KEY_FILE
 fi
 rm -f $IAAS_ACCESS_KEY_FILE
}

function cleanAndExit() {
 KEEP_PUB_KEY=""
 disconnectFromAccount
 rm -f $IAAS_PASSWORD_FILE
 echo "*************************************************************"
 echo "** $0 Exiting."
 echo "*************************************************************"
 
 exit 1
}

#############################################################
##
## stopVServer
## ===========
##
## Find and stop a vServer.
##
#############################################################

function stopVServer() {
# echo "Stopping vServer $VSERVER_NAME"
 getVServers
 getVServerId
 echo "Stopping vServer $VSERVER_NAME $VSERVER_ID"
 $IAAS_HOME/bin/iaas-stop-vservers --vserver-ids $VSERVER_ID --force
 pauseUntilVServerShutdown
}

#############################################################
##
## startVServer
## ============
##
## Find and stop a vServer.
##
#############################################################

function startVServer() {
# echo "Starting vServer $VSERVER_NAME"
 getVServers
 getVServerId
 echo "Starting vServer $VSERVER_NAME $VSERVER_ID"
 $IAAS_HOME/bin/iaas-start-vservers --vserver-ids $VSERVER_ID
 pauseUntilVServerRunning
}

#############################################################
##
## deleteVServer
## =============
##
## Find and delete a vServer.
##
#############################################################

function deleteVServer() {
# echo "Deleting vServer $VSERVER_NAME"
 getVServers
 getVServerId
 echo "Deleting vServer $VSERVER_NAME $VSERVER_ID"
 $IAAS_HOME/bin/iaas-terminate-vservers --force --vserver-ids $VSERVER_ID
}

#############################################################
##
## stopVServers
## ============
##
## Stop one or more vServers running within the currently
## connected Account. If a specific vServer Name is passed in
## $VSERVER as specified on the command line using -v then 
## this will be the one stopped. If no VSERVER is specified
## then all vServers in the Account will be stopped.
##
#############################################################

function stopVServers() {
 getVServers
 VSERVER_IDS=""
 VSERVER_NAMES=""
 for vserver in "${vserversArray[@]}"
 do
 VSERVER_ID=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_NAME=${vserver%%|*}
 if [[ "$VSERVER" == "" || "$VSERVER" == "$VSERVER_NAME" ]]
 then
 if [[ "$VSERVER_IDS" == "" ]]
 then
 VSERVER_IDS=$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAME
 else
 VSERVER_IDS=$VSERVER_IDS","$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAMES","$VSERVER_NAME
 fi
 fi
 done
 if [[ "$VSERVER_IDS" != "" ]]
 then
 echo "Stopping vServer(s) [$VSERVER_NAMES] [$VSERVER_IDS]"
 $IAAS_HOME/bin/iaas-stop-vservers --vserver-ids $VSERVER_IDS --force
 else
 echo "No vServers to stop"
 fi
}

#############################################################
##
## startVServers
## =============
##
## Start one or more vServers stopped within the currently
## connected Account. If a specific vServer Name is passed in
## $VSERVER as specified on the command line using -v then 
## this will be the one started. If no VSERVER is specified
## then all vServers in the Account will be started.
##
#############################################################

function startVServers() {
 getVServers
 VSERVER_IDS=""
 VSERVER_NAMES=""
 for vserver in "${vserversArray[@]}"
 do
 VSERVER_ID=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_NAME=${vserver%%|*}
 if [[ "$VSERVER" == "" || "$VSERVER" == "$VSERVER_NAME" ]]
 then
 if [[ "$VSERVER_IDS" == "" ]]
 then
 VSERVER_IDS=$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAME
 else
 VSERVER_IDS=$VSERVER_IDS","$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAMES","$VSERVER_NAME
 fi
 fi
 done
 if [[ "$VSERVER_IDS" != "" ]]
 then
 echo "Starting vServer(s) [$VSERVER_NAMES] [$VSERVER_IDS]"
 $IAAS_HOME/bin/iaas-start-vservers --vserver-ids $VSERVER_IDS
 else
 echo "No vServers to start"
 fi
}

#############################################################
##
## rebootVServers
## ==============
##
## Reboot one or more vServers stopped within the currently
## connected Account. If a specific vServer Name is passed in
## $VSERVER as specified on the command line using -v then 
## this will be the one started. If no VSERVER is specified
## then all vServers in the Account will be started.
##
#############################################################

function rebootVServers() {
 getVServers
 VSERVER_IDS=""
 VSERVER_NAMES=""
 for vserver in "${vserversArray[@]}"
 do
 VSERVER_ID=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_NAME=${vserver%%|*}
 if [[ "$VSERVER" == "" || "$VSERVER" == "$VSERVER_NAME" ]]
 then
 if [[ "$VSERVER_IDS" == "" ]]
 then
 VSERVER_IDS=$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAME
 else
 VSERVER_IDS=$VSERVER_IDS","$VSERVER_ID
 VSERVER_NAMES=$VSERVER_NAMES","$VSERVER_NAME
 fi
 fi
 done
 if [[ "$VSERVER_IDS" != "" ]]
 then
 echo "Rebooting vServer(s) [$VSERVER_NAMES] [$VSERVER_IDS]"
 $IAAS_HOME/bin/iaas-reboot-vservers --vserver-ids $VSERVER_IDS
 else
 echo "No vServers to reboot"
 fi
}

#############################################################
##
## listVServers
## ============
##
## List the vServers running on the specified Account is 
## the verbose flag is set then all vServer details will be 
## displayed otherwise simple the Acc and Name.
##
#############################################################

function listVServers() {
 getVServers
 for vserver in "${vserversArray[@]}"
 do
 VSERVER_ID=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_NAME=${vserver%%|*}
 vserver=${vserver#*|}
 if [[ "$VSERVER" == "" || "$VSERVER" == "$VSERVER_NAME" ]]
 then
 if [[ "$VERBOSE" == "true" ]]
 then
 if [[ "$HRF" == "true" ]]
 then
 DESCRIPTION=${vserver%%|*}
 vserver=${vserver#*|}
 STATE=${vserver%%|*}
 vserver=${vserver#*|}
 NETWORK_IDS=${vserver%%|*}
 vserver=${vserver#*|}
 NETWORK_IPS=${vserver%%|*}
 vserver=${vserver#*|}
 TEMPLATE_ID=${vserver%%|*}
 vserver=${vserver#*|}
 SSH_KEY=${vserver%%|*}
 vserver=${vserver#*|}
 VSTYPE_ID=${vserver%%|*}
 vserver=${vserver#*|}
 getNetworks
 getTemplates
 getVSTypes
 # Get VServer Type Name
 getVSTypeName
 # Get Template Type Name
 getTemplateName
 echo "$ACCOUNT_NAME|$VSERVER_NAME|$VSERVER_ID"
 echo " Name : $VSERVER_NAME"
 echo " Description : "$(echo $DESCRIPTION | sed 's/_/ /g')
 echo " State : $STATE"
 for NETWORK_ID in ${NETWORK_IDS//,/ }
 do
 NETWORK_IP=${NETWORK_IPS%%,*}
 NETWORK_IPS=${NETWORK_IPS#*,}
 getNetworkName
 echo " Network : $NETWORK_NAME ($NETWORK_IP) [$NETWORK_ID]"
 done
 echo " Template : $TEMPLATE_NAME [$TEMPLATE_ID]"
 echo " Server Type : $VSTYPE_NAME [$VSTYPE_ID]"
 else
 echo "$ACCOUNT_NAME|$VSERVER_NAME|$VSERVER_ID|"$(echo $vserver | sed 's/_/ /g')
 fi
 else
 echo "$ACCOUNT_NAME|$VSERVER_NAME"
 fi
 fi
 done
}

#############################################################
##
## listVServerStatus
## =================
##
## List the Status of the vServers within an Account.
##
#############################################################

function listVServerStatus() {
 getVServers
 for vserver in "${vserversArray[@]}"
 do
 VSERVER_ID=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_NAME=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_DESC=${vserver%%|*}
 vserver=${vserver#*|}
 VSERVER_STATUS=${vserver%%|*}
 if [[ "$VSERVER" == "" || "$VSERVER" == "$VSERVER_NAME" ]]
 then
 echo "$ACCOUNT_NAME|$VSERVER_NAME|$VSERVER_STATUS"
 fi
 done
}

#############################################################
##
## listVNets
## =========
##
## List the Networks within an Account.
##
#############################################################

function listVNets() {
 getNetworks
 for vnet in "${vnetsArray[@]}"
 do
 VNET_ID=${vnet%%|*}
 vnet=${vnet#*|}
 VNET_NAME=${vnet%%|*}
 vnet=${vnet#*|}
 if [[ "$VERBOSE" == "true" ]]
 then
 echo "$ACCOUNT_NAME|$VNET_NAME|$VNET_ID|"$(echo $vnet | sed 's/_/ /g')
 else
 VNET_DESC=${vnet%%|*}
 vnet=${vnet#*|}
 VNET_STATUS=${vnet%%|*}
 vnet=${vnet#*|}
 VNET_IP=${vnet%%|*}
 echo "$ACCOUNT_NAME|$VNET_NAME|$VNET_IP"
 fi
 done
}

#############################################################
##
## listDistributionGroups
## ======================
##
## List the Distribution Groups within an Account.
##
#############################################################

function listDistributionGroups() {
 getDistributionGroups
 for distGrp in "${distGrpsArray[@]}"
 do
 DG_ID=${distGrp%%|*}
 distGrp=${distGrp#*|}
 DG_NAME=${distGrp%%|*}
 distGrp=${distGrp#*|}
 if [[ "$VERBOSE" == "true" ]]
 then
 echo "$ACCOUNT_NAME|$DG_NAME|$DG_ID|"$(echo $distGrp | sed 's/_/ /g')
 else
 DG_DESC=${distGrp%%|*}
 distGrp=${distGrp#*|}
 DG_STATUS=${distGrp%%|*}
 echo "$ACCOUNT_NAME|$DG_NAME|$VNET_IP"
 fi
 done
}

#############################################################
##
## listTemplates
## =============
##
## List the Templates within an Account.
##
#############################################################

function listTemplates() {
 getTemplates
 for template in "${templatesArray[@]}"
 do
 TEMPLATE_ID=${template%%|*}
 template=${template#*|}
 TEMPLATE_NAME=${template%%|*}
 template=${template#*|}
 if [[ "$VERBOSE" == "true" ]]
 then
 echo "$ACCOUNT_NAME|$TEMPLATE_NAME|$TEMPLATE_ID|"$(echo $template | sed 's/_/ /g')
 else
 TEMPLATE_DESC=${template%%|*}
 template=${template#*|}
 TEMPLATE_STATUS=${template%%|*}
 echo "$ACCOUNT_NAME|$TEMPLATE_NAME"
 fi
 done
}

#############################################################
##
## listVolumes
## ===========
##
## List the Volumes within an Account.
##
#############################################################

function listVolumes() {
 getVolumes
 for volume in "${volumesArray[@]}"
 do
 VOLUME_ID=${volume%%|*}
 volume=${volume#*|}
 VOLUME_NAME=${volume%%|*}
 volume=${volume#*|}
 if [[ "$VERBOSE" == "true" ]]
 then
 echo "$ACCOUNT_NAME|$VOLUME_NAME|$VOLUME_ID|"$(echo $volume | sed 's/_/ /g')
 else
 VOLUME_DESC=${volume%%|*}
 volume=${volume#*|}
 VOLUME_STATUS=${volume%%|*}
 volume=${volume#*|}
 VOLUME_SIZE=${volume%%|*}
 echo "$ACCOUNT_NAME|$VOLUME_NAME|$VOLUME_SIZE"
 fi
 done
}

#############################################################
##
## getAccountId
## ============
##
## Get the Account id based on the supplied name.
##
#############################################################

function getAccountId() {
echo $accountArray
 for account in "${accountsArray[@]}"
 do
 ACCOUNT_ID=${account%%|*}
 account=${account#*|}
 ACCOUNT_NAME=${account%%|*}
 if [[ "$ACCOUNT" == "$ACCOUNT_NAME" && "$ACCOUNT_ID" == ACC-* ]]
 then
 break
 fi
 ACCOUNT_ID=""
 done
}

#############################################################
##
## getDistributionGroupId
## ======================
##
## Get the Distribution Group id based on the supplied name.
##
#############################################################

function getDistributionGroupId() {
 for line in "${distGrpsArray[@]}"
 do
 DISTGROUP_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$NAME" == "$DISTGROUP_NAME" ]]
 then
 break
 fi
 DISTGROUP_ID=""
 done
}

#############################################################
##
## getIPAddress
## ============
##
## Get a static IP Address for a given network if an * is 
## supplied. If an IP Address is supplied it simple returns
## specified IP.
##
#############################################################

function getIPAddress() {
 #echo "Checking IP Address $IP_ADDRESS"
 IP_AVAILABLE=""
 if [[ "$IP_ADDRESS" == "*" ]]
 then
 allocateIPAddress
 fi
 getNetworkStaticIPs
 for line in "${staticIPsArray[@]}"
 do
 IP=${line%%|*}
 if [[ "$IP" == "$IP_ADDRESS" ]]
 then
 IP_AVAILABLE="true"
 fi
 done
 if [[ "$IP_AVAILABLE" == "" ]]
 then
 echo "$WARNING_PREFIX IP Address $IP_ADDRESS is not available for static allocation"
 IP_ADDRESS=""
 FAILED="true"
 fi
 #echo "Returning IP Address $IP_ADDRESS"
}

#############################################################
##
## allocateIPAddress
## =================
##
## Allocate a single IP Address from a specified Network.
##
#############################################################

function allocateIPAddress() {
 if [[ "$NETWORK_ID" == VNET-* ]]
 then
 IP_ADDRESS=`$IAAS_HOME/bin/iaas-allocate-ip-addresses --vnet $NETWORK_ID --num 1`
 else
 echo "$WARNING_PREFIX Network Id \"$NETWORK_ID\" is not valid."
 fi
}
#############################################################
##
## getNetworkId
## ============
##
## Get the Network id based on the supplied name.
##
#############################################################

function getNetworkId() {
 NETWORK_ID=""
 for line in "${vnetsArray[@]}"
 do
 NETWORK_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$NAME" == "$NETWORK_NAME" ]]
 then
 break
 fi
 NETWORK_ID=""
 done
 if [[ "$NETWORK_ID" == "" ]]
 then
 echo "$WARNING_PREFIX Network with name $NETWORK_NAME has not been found"
 FAILED="true"
 fi
}

#############################################################
##
## getNetworkName
## ==============
##
## Gets the name of a network based on the Id.
##
#############################################################

function getNetworkName() {
 NETWORK_NAME=""
 for line in "${vnetsArray[@]}"
 do
 ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$ID" == "$NETWORK_ID" ]]
 then
 NETWORK_NAME=$NAME
 break
 fi
 done
}

#############################################################
##
## getVNetworkState
## ================
##
## Loop through the Networks associated with the Account 
## checking to see if the creation has completed and the 
## network has a status of OK. At this point return.
##
#############################################################

function getVNetworkState() {
 getNetworks
 for line in "${vnetsArray[@]}"
 do
 NETWORK_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 line=${line#*|}
 line=${line#*|}
 NETWORK_STATE=${line%%|*}
 if [[ "$NETWORK_NAME" == "$NAME" ]]
 then
 break;
 fi
 done
}

#############################################################
##
## getTemplateId
## =============
##
## Get the Template id based on the supplied name.
##
#############################################################

function getTemplateId() {
 TEMPLATE_ID=""
 for line in "${templatesArray[@]}"
 do
 TEMPLATE_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$TEMPLATE_NAME" == "$NAME" ]]
 then
 break
 fi
 TEMPLATE_ID=""
 done
 if [[ "$TEMPLATE_ID" == "" ]]
 then
 echo "$WARNING_PREFIX Template with name $TEMPLATE_NAME has not been found"
 FAILED="true"
 fi
}

#############################################################
##
## getTemplateState
## ================
##
## Loop through the Template associated with the Account 
## checking to see if the upload has completed and the 
## template has a status of OK. At this point return.
##
#############################################################

function getTemplateState() {
 getTemplates
 for line in "${templatesArray[@]}"
 do
 TEMPLATE_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 line=${line#*|}
 line=${line#*|}
 TEMPLATE_STATE=${line%%|*}
 if [[ "$TEMPLATE_NAME" == "$NAME" ]]
 then
 break;
 fi
 done
}

#############################################################
##
## getTemplateName
## ===============
##
## Gets the name of a Template based on the Id.
##
#############################################################

function getTemplateName() {
 TEMPLATE_NAME=""
 for line in "${templatesArray[@]}"
 do
 ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$ID" == "$TEMPLATE_ID" ]]
 then
 TEMPLATE_NAME=$NAME
 break
 fi
 done 
}

#############################################################
##
## getVolumeId
## ===========
##
## Get the Volume id based on the supplied name.
##
#############################################################

function getVolumeId() {
 VOLUME_ID=""
 for line in "${volumesArray[@]}"
 do
 VOLUME_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$NAME" == "$VOLUME_NAME" ]]
 then
 break;
 fi
 VOLUME_ID=""
 done 
 if [[ "$VOLUME_ID" == "" ]]
 then
 echo "$WARNING_PREFIX Volume with name $VOLUME_NAME has not been found"
 FAILED="true"
 fi
}

#############################################################
##
## getVServerId
## ============
##
## Get the VServer id based on the supplied name.
##
#############################################################

function getVServerId() {
 VSERVER_ID=""
 for line in "${vserversArray[@]}"
 do
 VSERVER_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$VSERVER_NAME" == "$NAME" ]]
 then
 break;
 fi
 VSERVER_ID=""
 done 
 if [[ "$VSERVER_ID" == "" ]]
 then
 echo "$WARNING_PREFIX VServer with name $VSERVER_NAME has not been found"
 FAILED="true"
 fi
}

#############################################################
##
## getVServerState
## ===============
##
## Get the VServer running state based on the supplied name.
##
#############################################################

function getVServerState() {
 getVServers
 for line in "${vserversArray[@]}"
 do
 VSERVER_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 line=${line#*|}
 DESCRIPTION=${line%%|*}
 line=${line#*|}
 VSERVER_STATE=${line%%|*}
 if [[ "$VSERVER_NAME" == "$NAME" ]]
 then
 break;
 fi
 done 
}

#############################################################
##
## getVSTypeId
## ===========
##
## Get the VServer Type id based on the supplied name.
##
#############################################################

function getVSTypeId() {
 VSTYPE_ID=""
 for line in "${vsTypesArray[@]}"
 do
 VSTYPE_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$VSTYPE_NAME" == "$NAME" ]]
 then
 break
 fi
 VSTYPE_ID=""
 done
 if [[ "$VSTYPE_ID" == "" ]]
 then
 echo "$WARNING_PREFIX VServer Type with name $VSTYPE_NAME has not been found"
 FAILED="true"
 fi
}

#############################################################
##
## getVSTypeName
## =============
##
## Gets the name of a vServer Type based on the Id.
##
#############################################################

function getVSTypeName() {
 VSTYPE_NAME=""
 for line in "${vsTypesArray[@]}"
 do
 ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 if [[ "$ID" == "$VSTYPE_ID" ]]
 then
 VSTYPE_NAME=$NAME
 break
 fi
 done 
}

#############################################################
##
## createDistributionGroup
## =======================
##
## Create a Distribution Group based on the supplied details.
##
#############################################################

function createDistributionGroup() {
 # Create Distribution Group
# echo "About to execute : $IAAS_HOME/bin/iaas-create-distribution-group --name $DISTGROUP_NAME"
# $IAAS_HOME/bin/iaas-create-distribution-group --name $DISTGROUP_NAME
 CMD="$IAAS_HOME/bin/iaas-create-distribution-group --name $DISTGROUP_NAME"

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 # Lets pause
 pauseUntilDistributionGroupCreated
}

#############################################################
##
## pauseUntilDistributionGroupCreated
## ==================================
##
## Pause the script until the Distribution Group has been created.
##
#############################################################

function pauseUntilDistributionGroupCreated() {
 getDistributionGroups
 getDistributionGroupId
 while [[ "$DISTGROUP_ID" == "" ]]
 do
 # Lets pause
 echo "Just Waiting 30 Seconds......"
 sleep 30
 getDistributionGroups
 getDistributionGroupId
 done
}

#############################################################
##
## createVirtualNetwork
## ====================
##
## Create a Virtual Private Network based on the name 
## supplied.
##
#############################################################

function createVirtualNetwork() {
 # 
# echo "About to execute : $IAAS_HOME/bin/iaas-create-vnet --name $NETWORK_NAME --size $NETWORK_IPS "
# $IAAS_HOME/bin/iaas-create-vnet --name $NETWORK_NAME --size $NETWORK_IPS
 CMD="$IAAS_HOME/bin/iaas-create-vnet --name $NETWORK_NAME --size $NETWORK_IPS"

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 # Lets pause
 pauseUntilVirtualNetworkCreated
}

#############################################################
##
## pauseUntilVirtualNetworkCreated
## ===============================
##
## Pause the script until the Virtual Private Network has
## been created.
##
#############################################################

function pauseUntilVirtualNetworkCreated() {
 echo "Pausing until Virtual Network creation has completed"
 getVNetworkState
 while [[ "$NETWORK_STATE" != "OK" ]]
 do
 echo "$NAME $NETWORK_STATE"
 if [[ "$NETWORK_STATE" != "SCHEDULED" ]]
 then
 echo "Sleeping......."
 sleep 30
 elif [[ "$NETWORK_STATE" != "RUNNING" ]]
 then
 echo "Sleeping......."
 sleep 30
 fi
 getVNetworkState
 done
}

#############################################################
##
## createVolume
## ============
##
## Create a Volume based on the supplied details.
##
#############################################################

function createVolume() {
 # Create Volume
# echo "About to execute : $IAAS_HOME/bin/iaas-create-volume --name $VOLUME_NAME --size $VOLUME_SIZE"
# $IAAS_HOME/bin/iaas-create-volume --name $VOLUME_NAME --size $VOLUME_SIZE
 CMD="$IAAS_HOME/bin/iaas-create-volume --name $VOLUME_NAME --size $VOLUME_SIZE"

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 # Lets pause
 pauseUntilVolumeCreated
}

#############################################################
##
## pauseUntilVolumeCreated
## =======================
##
## Pause the script until the Volume has been created.
##
#############################################################

function pauseUntilVolumeCreated() {
 getVolumes
 getVolumeId
 while [[ "$VOLUME_ID" == "" ]]
 do
 # Lets pause
 echo "Just Waiting 30 Seconds......"
 sleep 30
 getVolumes
 getVolumeId
 done
}

#############################################################
##
## createVServer
## =============
##
## Create a vServer based on the supplied details.
##
#############################################################

function createVServer() {
 echo "Creating vServer $VSERVER_NAME"

 # Get Ids associated with names
 getVSTypeId
 getTemplateId
 # Convert Network Names to Ids
 NETWORK_IDS=""
 # Validated IPs
 NETWORK_IPS=""
 # Reset FAILED
 FAILED=""
 while true
 do
 # Get ID and add to list
 NETWORK_NAME=${NETWORK_NAMES%%,*}
 NETWORK_NAMES=${NETWORK_NAMES#*,}
 getNetworkId
 if [[ "$NETWORK_IDS" != "" ]]
 then
 NETWORK_IDS="$NETWORK_IDS,$NETWORK_ID"
 else
 NETWORK_IDS=$NETWORK_ID
 fi
 # Check IPs
 IP_ADDRESS=${IP_ADDRESSES%%,*}
 IP_ADDRESSES=${IP_ADDRESSES#*,}
 getIPAddress
 if [[ "$NETWORK_IPS" != "" ]]
 then
 NETWORK_IPS="$NETWORK_IPS,$IP_ADDRESS"
 else
 NETWORK_IPS=$IP_ADDRESS
 fi
 # If I've processed all then exit
 if [[ "$NETWORK_NAME" == "$NETWORK_NAMES" ]]
 then
 break
 fi
 done
 getDistributionGroupId

 if [[ "$DESCRIPTION" == "" ]]
 then
 DESCRIPTION="Created by $0"
 fi

 if [[ "$FAILED" == "true" || "$VSTYPE_ID" == "" || "$TEMPLATE_ID" == "" || "$NETWORK_IDS" == "" ]]
 then
 echo ""
 echo "$ERROR_PREFIX Unable to create vServer due to missing information. Please check \"$WARNING_PREFIX\" messages for missing information."
 echo ""
 cleanAndExit
 fi

 # Create vServer
 if [[ "$DISTGROUP_ID" != "" ]]
 then
# echo "About to execute : $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS --dist-group $DISTGROUP_ID"
# $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS --dist-group $DISTGROUP_ID --desc "$DESCRIPTION"
 CMD="$IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS --dist-group $DISTGROUP_ID --desc \"$DESCRIPTION\""
 else
# echo "About to execute : $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS"
# $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS --desc "$DESCRIPTION"
 CMD="$IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $NETWORK_IPS --desc \"$DESCRIPTION\""
 fi

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 if [[ "$RESULT" == VSRV-* ]]
 then
 pauseUntilVServerRunning
 if [[ "$REMOVE_SSH_KEYS" == "true" ]]
 then
 removeSshKeyRequirement
 elif [[ "$POST_CREATE_SCRIPT" != "" ]]
 then
 injectScriptWithSshKey
 fi

 echo "vServer $VSERVER_NAME has been created"
 else
 echo "$WARNING_PREFIX Failed to create VServer with name $VSERVER_NAME"
 FAILED="true" 
 fi
}

#############################################################
##
## findAccessibleSshIP
## =======================
##
## Attempts to find a route to the new vServer using the ssh
## key.
##
#############################################################

function findAccessibleSshIP() {
 SSH_FLAGS="-i $KEY_FILE -o StrictHostKeyChecking=no"

 SSH_IP_ADDRESS=""
 for IP in ${NETWORK_IPS//,/ }
 do
 # Test first with expect because IP is probably not in the list of known hosts
SSH_RESULT=$((expect - << EOF
spawn ssh $SSH_FLAGS root@$IP "hostname"
expect -re "assword" 
send "Password\r"
expect -re "~]#" 
send "hostname\r\n"
set timeout 10
EOF
) | while read line; do if test "${line#*$VSERVER_NAME}" != "$line"; then echo $VSERVER_NAME; fi; done)
if [[ "$SSH_RESULT" != "$VSERVER_NAME" ]]
then
SSH_RESULT=$((expect - << EOF
spawn ssh $SSH_FLAGS root@$IP "hostname"
expect -re "assword" 
send "Password\r"
expect -re "~]#" 
send "hostname\r\n"
set timeout 10
EOF
) | while read line; do if test "${line#*$VSERVER_NAME}" != "$line"; then echo $VSERVER_NAME; fi; done)
fi

 if [[ "$SSH_RESULT" == "$VSERVER_NAME" ]]
 then
 echo "$IP Address works for ssh"
 SSH_IP_ADDRESS=$IP
 break;
 else
 echo "$IP Address does not work for ssh"
 fi
 done

}

#############################################################
##
## removeSshKeyRequirement
## =======================
##
## When a vServer is created using the cli the it is set up
## with a ssh key this function will remove that requirement.
##
#############################################################

function removeSshKeyRequirement() {
 findAccessibleSshIP
 if [[ "$SSH_IP_ADDRESS" != "" ]]
 then
 if [[ "$POST_CREATE_SCRIPT" != "" ]]
 then
 injectScriptIntoVServer
 fi

 echo ""
 echo "Removing ssh key requirement for $VSERVER_NAME on $SSH_IP_ADDRESS"

 ssh $SSH_FLAGS root@$SSH_IP_ADDRESS "cp /etc/ssh/sshd_config /etc/ssh/sshd_config.orig"
 ssh $SSH_FLAGS root@$SSH_IP_ADDRESS "sed 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config.orig > /etc/ssh/sshd_config"
 ssh $SSH_FLAGS root@$SSH_IP_ADDRESS "service sshd restart"

 echo "Removed ssh key requirement for $VSERVER_NAME"
 else
 echo ""
 echo "Unable to find a route to $VSERVER_NAME to remove the ssh key requirement you will need to do the following"
 echo ""
 echo "1. ssh into the vServer using: ssh -i $KEY_FILE -l root <IP Address>"
 echo "2. Edit /etc/ssh/sshd_config and replace \"PasswordAuthentication no\" with \"PasswordAuthentication yes\""
 echo "3. Restart sshd service: service sshd restart"
 echo ""
 echo "cp /etc/ssh/sshd_config /etc/ssh/sshd_config.orig"
 echo "sed \'s/PasswordAuthentication no/PasswordAuthentication yes/\' /etc/ssh/sshd_config.orig > /etc/ssh/sshd_config"
 echo "service sshd restart"
 echo ""
 KEEP_PUB_KEY=true
 if [[ "$POST_CREATE_SCRIPT" != "" ]]
 then
 echo ""
 echo "You will need to manually run $POST_CREATE_SCRIPT on the $VSERVER_NAME"
 echo ""
 fi
 fi
}

#############################################################
##
## injectScriptWithSshKey
## =======================
##
## Inject a post creation script that will be executed once 
## the vServer is running. This will be done only if the 
## script can access the new vServer.
##
#############################################################

function injectScriptWithSshKey() {
 findAccessibleSshIP
 if [[ "$SSH_IP_ADDRESS" != "" ]]
 then
 injectScriptIntoVServer
 else
 echo ""
 echo "Unable to find a route to $VSERVER_NAME to rto execute $POST_CREATE_SCRIPT"
 echo ""
 echo "1. ssh into the vServer using: ssh -i $KEY_FILE -l root <IP Address>"
 echo ""
 echo "You will need to manually run $POST_CREATE_SCRIPT on the $VSERVER_NAME"
 echo ""
 KEEP_PUB_KEY=true
 fi
}

#############################################################
##
## injectScriptIntoVServer
## =======================
##
## Inject a post creation script that will be executed once 
## the vServer is running. This will be done only if the 
## script can access the new vServer.
##
#############################################################

function injectScriptIntoVServer() {
 echo ""
 echo "Executing $POST_CREATE_SCRIPT on $VSERVER_NAME on $SSH_IP_ADDRESS"

 scp $SSH_FLAGS $POST_CREATE_SCRIPT root@$SSH_IP_ADDRESS:/tmp
 ssh $SSH_FLAGS root@$SSH_IP_ADDRESS "chmod +x /tmp/$POST_CREATE_SCRIPT"
 ssh $SSH_FLAGS root@$SSH_IP_ADDRESS "/tmp/$POST_CREATE_SCRIPT"
}
#############################################################
##
## pauseUntilVServerRunning
## ========================
##
## Pause the script until the vServer is running.
##
#############################################################

function pauseUntilVServerRunning() {
 # Wait until the Server is running before creating the next
 echo "Pausing until vServer is Running"
 getVServerState
 while [[ "$VSERVER_STATE" != "RUNNING" ]]
 do
 echo "$NAME $VSERVER_STATE"
 if [[ "$VSERVER_STATE" != "RUNNING" ]]
 then
 echo "Sleeping......."
 sleep 30
 fi
 if [[ "$VSERVER_STATE" == "FAILED" ]]
 then
 echo "$NAME Will Delete Automatically after remaining Failed for a period....."
 break
 fi
 getVServerState
 done
 echo "$NAME $VSERVER_STATE"
 # Lets pause for a minute or two
 echo "Just Waiting 30 Seconds......"
 sleep 30
}

#############################################################
##
## pauseUntilVServerShutdown
## ========================
##
## Pause the script until the vServer is shutdown.
##
#############################################################

function pauseUntilVServerShutdown() {
 # Wait until the Server is shutdown before creating the next
 echo "Pausing until vServer has Shutdown"
 getVServerState
 while [[ "$VSERVER_STATE" != "SHUTDOWNDETACHED" ]]
 do
 echo "$NAME $VSERVER_STATE"
 if [[ "$VSERVER_STATE" != "SHUTDOWNDETACHED" ]]
 then
 echo "Sleeping......."
 sleep 30
 fi
 getVServerState
 done
 echo "$NAME $VSERVER_STATE"
 # Lets pause for a minute or two
 echo "Just Waiting 30 Seconds......"
 sleep 30
}

#############################################################
##
## attachVolume
## =======================
##
## Attach a Volume to a vServer.
##
#############################################################

function attachVolume() {
 # Get vServer Id
 getVServerId
 # Convert Volume Names to Ids
 VOLUME_IDS=""
 while true
 do
 VOLUME_NAME=${VOLUME_NAMES%%,*}
 VOLUME_NAMES=${VOLUME_NAMES#*,}
 getVolumeId
 if [[ "$VOLUME_IDS" != "" ]]
 then
 VOLUME_IDS="$VOLUME_IDS,$VOLUME_ID"
 else
 VOLUME_IDS=$VOLUME_ID
 fi
 if [[ "$VOLUME_NAME" == "$VOLUME_NAMES" ]]
 then
 break
 fi
 done
 # Attach Volumes
# echo "About to execute : $IAAS_HOME/bin/iaas-attach-volumes-to-vserver --vserver-id $VSERVER_ID --volume-ids $VOLUME_IDS"
# $IAAS_HOME/bin/iaas-attach-volumes-to-vserver --vserver-id $VSERVER_ID --volume-ids $VOLUME_IDS
 CMD="$IAAS_HOME/bin/iaas-attach-volumes-to-vserver --vserver-id $VSERVER_ID --volume-ids $VOLUME_IDS"

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 # Lets pause
 echo "Just Waiting 30 Seconds......"
 sleep 30
}

#############################################################
##
## uploadServerTemplate
## ====================
##
## Upload a tgz file that defines a server template. It is 
## recommended these be copied to the ZFS first and then the
## appropriate URL from the ZFS be used.
##
#############################################################

function uploadServerTemplate() {
 # Upload Template
# echo "About to execute : $IAAS_HOME/bin/iaas-create-server-template-from-url --name $TEMPLATE_NAME --url $TEMPLATE_URL"
# $IAAS_HOME/bin/iaas-create-server-template-from-url --name $TEMPLATE_NAME --url $TEMPLATE_URL
 CMD="$IAAS_HOME/bin/iaas-create-server-template-from-url --name $TEMPLATE_NAME --url $TEMPLATE_URL"

 #*******************************************
 echo "$CMD_MSG $CMD"
 echo "$CMD_MSG $CMD" >> $LOG_FILE
 IFS=$'\n' RESULT=( $(eval $CMD) )
 unset IFS
 echo "Command Result : $RESULT" >> $LOG_FILE
 #*******************************************

 # Lets pause
 pauseUntilServerTemplateUploaded
}

function deleteServerTemplate() {
 $IAAS_HOME/bin/iaas-delete-server-template --force --server-template-id $TEMPLATE_ID
}

#############################################################
##
## pauseUntilServerTemplateUploaded
## ================================
##
## Pause the script until the Template file has been uploaded
## to the Account.
##
#############################################################

function pauseUntilServerTemplateUploaded() {
 echo "Pausing until Template upload has completed"
 getTemplateState
 while [[ "$TEMPLATE_STATE" != "OK" ]]
 do
 echo "$NAME $TEMPLATE_STATE"
 if [[ "$TEMPLATE_STATE" != "SCHEDULED" ]]
 then
 echo "Sleeping......."
 sleep 30
 elif [[ "$TEMPLATE_STATE" != "RUNNING" ]]
 then
 echo "Sleeping......."
 sleep 30
 elif [[ "$TEMPLATE_STATE" != "FAILED" ]]
 then
 deleteServerTemplate
 echo "Sleeping......."
 sleep 30
 fi
 getTemplateState
 done
 echo "$NAME $TEMPLATE_STATE"
}

#############################################################
##
## createAssets
## ============
##
## This function loops through the information defined in
## the input file looking for actions to be executed. It will
## process the entries sequentially and simply call the
## appropriate sub-function to execute the iaas commands.
## Entries with invalid Actions will simply be ignored along
## with blank lines.
##
#############################################################

function createAssets() {
 # Read Entries into an Array
 IFS=$'\n' assetArray=( $(grep ":" $ASSET_FILE) )
 unset IFS
 # Process Array
 for line in "${assetArray[@]}"
 do
 #echo "Processing Line: $line"
 ACCOUNT=${line%%:*}
 line=${line#*:}
 ACTION=${line%%|*}
 line=${line#*|}
 if [[ "$ACTION" == "Connect" ]]
 then
 ACCOUNT_USER=${line%%|*}
 line=${line#*|}
 ACCOUNT_PASSWORD=${line%%|*}
 IAAS_USER=$ACCOUNT_USER
 echo "$ACCOUNT_PASSWORD" > $IAAS_PASSWORD_FILE
 getAccounts
 getAccountId
 connectToAccount

 ## Account Info
 getNetworks
 getVSTypes
 getTemplates
 elif [[ "$ACTION" == "Create" ]]
 then
 ASSET=${line%%|*}
 line=${line#*|}
 ASSET_DETAILS=$line
 if [[ "$ASSET" == "vServer" ]]
 then
 getDistributionGroups
 VSERVER_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 VSTYPE_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 TEMPLATE_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 NETWORK_NAMES=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 IP_ADDRESSES=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 DISTGROUP_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 DESCRIPTION=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 POST_CREATE_SCRIPT=${ASSET_DETAILS%%|*}

 createVServer
 elif [[ "$ASSET" == "vServers" ]]
 then
 getDistributionGroups
 createVServers
 elif [[ "$ASSET" == "Volume" ]]
 then
 VOLUME_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 VOLUME_SIZE=${ASSET_DETAILS%%|*}
 createVolume
 elif [[ "$ASSET" == "DistributionGroup" ]]
 then
 DISTGROUP_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 # Size is never specified
 # DISTGROUP_SIZE=${ASSET_DETAILS%%|*}
 createDistributionGroup
 elif [[ "$ASSET" == "VirtualNetwork" ]]
 then
 NETWORK_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 NETWORK_IPS=${ASSET_DETAILS%%|*}
 createVirtualNetwork
 fi
 elif [[ "$ACTION" == "Upload" ]]
 then
 ASSET=${line%%|*}
 line=${line#*|}
 ASSET_DETAILS=$line
 if [[ "$ASSET" == "ServerTemplate" ]]
 then
 TEMPLATE_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 TEMPLATE_URL=${ASSET_DETAILS%%|*}
 uploadServerTemplate
 fi
 elif [[ "$ACTION" == "Attach" ]]
 then
 ASSET=${line%%|*}
 line=${line#*|}
 ASSET_DETAILS=$line
 if [[ "$ASSET" == "Volume" ]]
 then
 getVolumes
 getVServers
 VSERVER_NAME=${ASSET_DETAILS%%|*}
 ASSET_DETAILS=${ASSET_DETAILS#*|}
 VOLUME_NAMES=${ASSET_DETAILS%%|*}
 attachVolume
 fi
 elif [[ "$ACTION" == "Disconnect" ]]
 then
 disconnectFromAccount
 fi
 done
}

#export RUN_DATE=`date +"%Y%m%d-%H%M"`

#############################################################
##
## copyServerFiles
## ===============
##
## Copy the vServer img files to working location.
##
#############################################################

function copyServerFiles() {
 echo "Copying vServer Files"

 TEMPLATE_DIR=$WORKING_DIR/$VSERVER_NAME/template/BASE
 VIRTUAL_MACHINES_DIR=$REPOSITORY_DIR/VirtualMachines
 VIRTUAL_DISKS_DIR=$REPOSITORY_DIR/VirtualDisks
 ROOT_IMG_FILE=""

 GREP_VM_CFG=`grep "'$VSERVER_NAME'" $VIRTUAL_MACHINES_DIR/*/vm.cfg`
 VM_CFG=${GREP_VM_CFG%%:*}

 mkdir -p $TEMPLATE_DIR
 cp $VM_CFG $TEMPLATE_DIR

 DISKS=`grep disk $VM_CFG`
 FILES=${DISKS#*:}
 DISK_CNT=0
 VM_CFG_TEMPLATE_NAME=$VSERVER_NAME"_TEMPLATE"
 while [[ "$DISKS" != "$FILES" ]]
 do
 #echo "FILES = $FILES"
 #echo "DISKS = $DISKS"
 #echo "DISK_CNT = $DISK_CNT"
 IMG_FILE=${FILES%%,*}
 echo "Copying $IMG_FILE"
 # Set root image we assume the first
 if [[ "$ROOT_IMG_FILE" == "" ]]
 then
 cp $IMG_FILE $TEMPLATE_DIR/System.img
 SYSTEM_IMG=${IMG_FILE#*VirtualDisks/}
 ROOT_IMG_FILE=$TEMPLATE_DIR/$SYSTEM_IMG
 ROOT_IMG_FILE=$TEMPLATE_DIR/System.img
 #echo "Root Image $ROOT_IMG_FILE"
 NEW_DISKS="'file:/OVS/seed_pool/$VM_CFG_TEMPLATE_NAME/System.img,hda,w'"
 else
 cp $IMG_FILE $TEMPLATE_DIR/System$DISK_CNT.img
 #echo "Secondary Image $IMG_FILE"
 FILES=${FILES#*,}
 #echo "FILES = $FILES"
 IMG_FILE_TYPE=${FILES%%\'*}
 #echo "IMG_FILE_TYPE = $IMG_FILE_TYPE"
 NEW_DISKS=$NEW_DISKS", 'file:/OVS/seed_pool/$VM_CFG_TEMPLATE_NAME/System$DISK_CNT.img,$IMG_FILE_TYPE'"
 fi
 # Shuffle line for next disk
 DISKS=${DISKS#*:}
 FILES=${DISKS#*:}
 DISK_CNT=$((DISK_CNT+1))
 done

 # Generate vm.cfg

 # Add Standard name format to allow ModifyJeOS to work
 echo "name = '$VM_CFG_TEMPLATE_NAME'" > $TEMPLATE_DIR/vm.cfg
 echo "disk = [$NEW_DISKS]" >> $TEMPLATE_DIR/vm.cfg
 echo "OVM_simple_name = ''" >> $TEMPLATE_DIR/vm.cfg
 # Copy remaining content of vm.cfg
 while read line
 do
 if [[ "$line" =~ ^name.*|^disk.*|^OVM_simple_name.*|^boot.*|^cpu_weight.*|^cpu_cap.*|^OVM_high_availability.*|^OVM_description.*|^on_poweroff.*|^guest_of_type.*|^vfb.* ]]
 then
 echo "Ignoring vm.cfg entry : $line"
 else
 echo $line >> $TEMPLATE_DIR/vm.cfg
 fi
 done < $VM_CFG

}

#############################################################
##
## unconfigureVM
## =============
##
## Remove / edit the files that a created / modified when the
## template has been used to created a vServer.
##
#############################################################

function unconfigureVM() {
 echo "Unconfiguring Root Image $ROOT_IMG_FILE"
 cd $WORKING_DIR
 # Make Temp Mount Directory
 mkdir -p $SYSTEMIMGDIR
 # Check if we are using LVM
 if [[ "$LVM" == "true" ]]
 then
 kpartx -a $ROOT_IMG_FILE
 vgscan
 vgchange -ay $VOL_GRP

 vgdisplay -s|grep $VOL_GRP
 if [[ "$?" == "1" ]]
 then
 echo could not find volume group: $VOL_GRP
 echo please cleanup mapped device
 exit
 else
 echo found volume group: $VOL_GRP
 fi

 lvdisplay -c|grep $LOG_VOL
 if [[ "$?" == "1" ]]
 then
 echo could not find logical volume: $LOG_VOL
 echo please cleanup mapped devices and run vgchange -an $VOL_GRP
 exit
 else
 echo found logical volume: $LOG_VOL
 fi

 ls -l /dev/mapper/$VOL_GRP-$LOG_VOL
 read p1
 mount /dev/mapper/$VOL_GRP-$LOG_VOL $SYSTEMIMGDIR
 if [[ "$?" == "1" ]]
 then
 echo "Failed to mount image file - exiting"
 exit
 fi
 else
 # Mount the Image file
 export LOOP=`losetup -f`
 # Create Loop for the System Image
 losetup $LOOP $ROOT_IMG_FILE
 kpartx -a $LOOP
 mount /dev/mapper/`basename $LOOP`p2 $SYSTEMIMGDIR
 if [[ "$?" == "1" ]]
 then
 echo "Failed to mount image file - exiting"
 exit
 fi
 fi

 echo "Mounted $SYSTEMIMGDIR"
 #Change Dir into mounted Image
 cd $SYSTEMIMGDIR

 # Unconfigure
 cp etc/sysconfig/ovmd etc/sysconfig/ovmd.orig
 sed 's/INITIAL_CONFIG=no/INITIAL_CONFIG=yes/g' etc/sysconfig/ovmd.orig > etc/sysconfig/ovmd
 rm -v etc/sysconfig/ovmd.orig

 cp etc/resolv.conf etc/resolv.conf.$RUN_DATE
 if [[ "$KEEP_RESOLV" != "true" ]]
 then
 sed -i '/.*/d' etc/resolv.conf
 else
 echo "Keeping unmodified resolv.conf"
 fi

 # Remove existing ssh information
 rm -v root/.ssh/*
 rm -v etc/ssh/ssh_host*

 # Clean up hosts
 cp etc/hosts etc/hosts.$RUN_DATE
 cp etc/sysconfig/networking/profiles/default/hosts etc/sysconfig/networking/profiles/default/hosts.$RUN_DATE
 if [[ "$KEEP_HOSTS" != "true" ]]
 then
 sed -i '/localhost/!d' etc/hosts
 sed -i '/localhost/!d' etc/sysconfig/networking/profiles/default/hosts
 else
 echo "Keeping unmodified hosts"
 fi

 # Clean up networking
 sed -i '/^GATEWAY/d' etc/sysconfig/network

 # Remove Network scripts
 rm -v etc/sysconfig/network-scripts/ifcfg-*eth*
 rm -v etc/sysconfig/network-scripts/ifcfg-ib*
 rm -v etc/sysconfig/network-scripts/ifcfg-bond*

 # Remove log files
 rm -v var/log/messages*
 rm -v var/log/ovm-template-config.log
 rm -v var/log/ovm-network.log
 rm -v var/log/boot.log*
 rm -v var/log/cron*
 rm -v var/log/maillog*
 rm -v var/log/rpmpkgs*
 rm -v var/log/secure*
 rm -v var/log/spooler*
 rm -v var/log/yum.log*

 # Remove Kernel Messages

 rm -v var/log/dmesg

 # Edit modprobe file
 sed -i '/bond/d' etc/modprobe.conf

 # Edit hwconf file
 cp etc/sysconfig/hwconf etc/sysconfig/hwconf.orig
 sed 's/mlx4_en/mlx4_core/' etc/sysconfig/hwconf.orig > etc/sysconfig/hwconf
 rm -v etc/sysconfig/hwconf.orig

 # Remove Exalogic Config file
 rm -v etc/exalogic.conf

 #Remove bash history
 rm -v root/.bash_history

 # Unmount the image file
 cd $WORKING_DIR
 umount $SYSTEMIMGDIR
 echo "Unmounted $SYSTEMIMGDIR"

 # Check if we are using LVM
 if [[ "$LVM" == "true" ]]
 then
 vgchange -an $VOL_GRP
 kpartx -d $ROOT_IMG_FILE
 else
 kpartx -d $LOOP
 losetup -d $LOOP
 fi

 rm -rf $SYSTEMIMGDIR
}

function modifySize() {
 if [[ "$ROOT_SIZE" != "" ]]
 then
 cd $TEMPLATE_DIR
 $MODIFYJEOS -f System.img -T $ROOT_SIZE
 fi
 if [[ "$SWAP_SIZE" != "" ]]
 then
 cd $TEMPLATE_DIR
 $MODIFYJEOS -f System.img -T $SWAP_SIZE
 fi
}

function buildTemplateTgz() {
 echo "Creating the Template tgz file"
 mkdir -p $DESTINATION_DIR
 cd $TEMPLATE_DIR
 TEMPLATE_TGZ=$DESTINATION_DIR/el_template_$VSERVER_NAME.tgz
 tar -zcvf $TEMPLATE_TGZ *
 echo "Template $TEMPLATE_TGZ file created"
}

function cleanWorkingDir() {
 echo "Cleaning Working Directory"
 cd $WORKING_DIR
 rm -rfv $VSERVER_NAME
}

#############################################################
##
## createTemplate
## ==============
##
## High level template creation function that will call the 
## required processing function in the necessary sequence.
##
#############################################################

function createTemplate() {
 VSERVER_NAME=$VSERVER
 copyServerFiles
 unconfigureVM
 modifySize
 buildTemplateTgz
 cleanWorkingDir
 echo ""
 echo ""
 echo "****************************************************"
 echo "**"
 echo "** $TEMPLATE_TGZ has been created from"
 echo "** vServer $VSERVER_NAME "
 echo "**"
 echo "****************************************************"
 echo ""
 echo ""
}

#############################################################
##
## executeRemoteCreateTemplate
## ===========================
##
## Execute the CreateTemplateFromVServer.sh on the specified 
## Compute Node. This is required because the Repository is
## not accessible from the EC VM. It's assumed we will not 
## need to enter a password.
##
#############################################################

function executeRemoteCreateTemplate() {
 echo "Executing Remote Functions"
 if [[ "$CN_IP_ADDRESS" != "" ]]
 then
 #ssh root@$CN_IP_ADDRESS "bash -s" < CreateTemplateFromVServer.sh -n $VSERVER_NAME -r $REPOSITORY_DIR -w $WORKING_DIR -d $DESTINATION_DIR
 #ssh root@$CN_IP_ADDRESS "bash -s -n $VSERVER_NAME -r $REPOSITORY_DIR -w $WORKING_DIR -d $DESTINATION_DIR" < CreateTemplateFromVServer.sh
 #cat CreateTemplateFromVServer.sh | ssh root@$CN_IP_ADDRESS "bash -s -n $VSERVER_NAME -r $REPOSITORY_DIR -w $WORKING_DIR -d $DESTINATION_DIR"
 ADDITIONAL=""
 if [[ "$KEEP_RESOLV" == "true" ]]
 then
 ADDITIONAL=" -keep-resolv"
 fi
 if [[ "$KEEP_HOSTS" == "true" ]]
 then
 ADDITIONAL=$ADDITIONAL" -keep-hosts"
 fi
 if [[ "$ROOT_SIZE" != "" ]]
 then
 ADDITIONAL=$ADDITIONAL" -T $ROOT_SIZE"
 fi
 if [[ "$SWAP_SIZE" != "" ]]
 then
 ADDITIONAL=$ADDITIONAL" -S $SWAP_SIZE"
 fi
 echo "Additional $ADDITIONAL"
 echo "Copying script $0 to $CN_IP_ADDRESS"
 scp $0 root@$CN_IP_ADDRESS:/tmp
 ssh root@$CN_IP_ADDRESS "chmod a+x /tmp/$0"
 if [[ "$LVM" == "true" ]]
 then
 ssh root@$CN_IP_ADDRESS "/tmp/$0 --create-template -v $VSERVER_NAME -r $REPOSITORY_DIR -w $WORKING_DIR -d $DESTINATION_DIR -lvm $VOL_GRP $LOG_VOL $ADDITIONAL"
 else
 ssh root@$CN_IP_ADDRESS "/tmp/$0 --create-template -v $VSERVER_NAME -r $REPOSITORY_DIR -w $WORKING_DIR -d $DESTINATION_DIR $ADDITIONAL"
 fi
 ssh root@$CN_IP_ADDRESS "rm -f /tmp/$0"

 TEMPLATE_TGZ=$DESTINATION_DIR/el_template_$VSERVER_NAME.tgz
 fi
}

#############################################################
##
## generateAssetsFile
## ==================
##
## Generates a Input script that can be used with the 
## --create-assets to recreate the account assets. 
##
#############################################################

function generateAssetsFile() {
 echo "$ACCOUNT:Connect|$ACCOUNT_USER|$ACCOUNT_PASSWORD" >> $ASSET_FILE
 echo "$ACCOUNT:Disconnect" >> $ASSET_FILE
}

#############################################################
##
## generateCaptureAssetFile
## ========================
##
## Generates a Input script that can be used with the 
## --create-assets to create a server based on the new 
## template.
##
#############################################################

function generateCaptureAssetFile() {
 echo "Capturing Asset information to input file $ASSET_FILE"
 if [[ "$ASSET_FILE" == "" ]]
 then
 ASSET_FILE=$VSERVER_NAME"Asset.in"
 fi
 echo "$ACCOUNT:Connect|$ACCOUNT_USER|$ACCOUNT_PASSWORD" > $ASSET_FILE
 # Here we are assuming that we have used the recommended mount
 SN_TEMPLATE_FILE=${TEMPLATE_TGZ/u01/export}
 echo "$ACCOUNT:Upload|ServerTemplate|$VSERVER_NAME-Template|http://$SN_IP_ADDRESS/shares$SN_TEMPLATE_FILE" >> $ASSET_FILE
 # Get VServer specific information
 getVServers
 getNetworks
 getVSTypes

 for line in "${vserversArray[@]}"
 do
 VSERVER_ID=${line%%|*}
 line=${line#*|}
 NAME=${line%%|*}
 line=${line#*|}
 if [[ "$NAME" == "$VSERVER_NAME" ]]
 then
 DESCRIPTION=${line%%|*}
 line=${line#*|}
 STATE=${line%%|*}
 line=${line#*|}
 NETWORK_IDS=${line%%|*}
 line=${line#*|}
 NETWORK_IPS=${line%%|*}
 line=${line#*|}
 TEMPLATE_ID=${line%%|*}
 line=${line#*|}
 SSH_KEY=${line%%|*}
 line=${line#*|}
 VSTYPE_ID=${line%%|*}
 line=${line#*|}

 NETWORK_NAMES=""
 #NETWORK_IPS=""
 for NETWORK_ID in ${NETWORK_IDS//,/ }
 do
 getNetworkName
 if [[ "$NETWORK_NAMES" == "" ]]
 then
 NETWORK_NAMES=$NETWORK_NAME
 if [[ "$BACKUP" != "true" ]]
 then
 NETWORK_IPS="*"
 fi
 else
 NETWORK_NAMES=$NETWORK_NAMES","$NETWORK_NAME
 if [[ "$BACKUP" != "true" ]]
 then
 NETWORK_IPS=$NETWORK_IPS",*"
 fi
 fi
 done

 if [[ "$VSTYPE" == "" ]]
 then
 # Get VServer Type Name
 getVSTypeName
 else
 VSTYPE_NAME=$VSTYPE
 fi

 echo "$ACCOUNT:Create|vServer|$VSERVER_NAME|$VSTYPE_NAME|$VSERVER_NAME-Template|$NETWORK_NAMES|$NETWORK_IPS|$VSDG|$DESCRIPTION||" >> $ASSET_FILE

 break
 fi
 done

 echo "$ACCOUNT:Disconnect" >> $ASSET_FILE

 echo "Generated Asset File $ASSET_FILE"

}

#############################################################
##
## captureVServer
## ==============
##
## High level template creation function that will call the 
## required processing function in the necessary sequence.
##
#############################################################

function captureVServer() {
 VSERVER_NAME=$VSERVER
 stopVServer
 executeRemoteCreateTemplate
 startVServer
 generateCaptureAssetFile
 echo ""
 echo ""
 echo "****************************************************"
 echo "**"
 echo "** $TEMPLATE_TGZ has been created from"
 echo "** vServer $VSERVER_NAME "
 echo "**"
 echo "****************************************************"
 echo ""
 echo ""
}

function simpleCreateVServer() {
 ASSET_FILE=/tmp/simpleCreateAsset.$$.in
 echo "$ACCOUNT:Connect|$ACCOUNT_USER|$ACCOUNT_PASSWORD" > $ASSET_FILE
 echo "$ACCOUNT:Create|vServer|$VSERVER|$VSTYPE|$VSTEMPLATE|$NETWORK_NAMES|$NETWORK_IPS|$VSDG|$VSDESCRIPTION|$SCRIPT|" >> $ASSET_FILE
 echo "$ACCOUNT:Disconnect" >> $ASSET_FILE
 getAccounts
 createAssets
}

function simpleStopVServer() {
 VSERVER_NAME=$VSERVER
 stopVServer
}

function simpleStartVServer() {
 VSERVER_NAME=$VSERVER
 startVServer
}

function simpleRestartVServer() {
 simpleStopVServer
 simpleStartVServer
}

function simpleDeleteVServer() {
 VSERVER_NAME=$VSERVER
 deleteVServer
}

#############################################################
##
## usage
## =====
##
## Show usage.
##
#############################################################

function usage() {
 echo ""
# echo >&2 "usage: $0 [-a <Account Name>] [-v <vServer Name>] [-u <Account User>] [-p <Account Password>] [-r <Repository Directory>] [-w <Working Directory>] [-d <Destination Directory>] [-cip <Compute Node (01) IP Address>] [-sip <Storage Node IP Address>] [-url <IAAS Base URL>] [-f <Asset Definition File>] [-remove-ssh] [--verbose] <Command>"
 echo >&2 "usage: $0 <Command> <Parameters>"
 echo >&2 " "
 echo >&2 "Commands "
 echo >&2 " "
 echo >&2 " --status-vservers"
 echo >&2 " List the status all the vServers in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the vServers. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [-v <vServer Name>] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --start-vservers"
 echo >&2 " Start all or the named -v vServer(s) in the specified Account. If no Account is specified"
 echo >&2 " then it will loop through all Accounts within the vDC starting the vServers."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [-v <vServer Name>] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --reboot-vservers"
 echo >&2 " Reboot all or the named -v vServer(s) in the specified Account. If no Account is specified"
 echo >&2 " then it will loop through all Accounts within the vDC starting the vServers."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [-v <vServer Name>] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --stop-vservers"
 echo >&2 " Stop all or the named -v vServer(s) in the specified Account. If no Account is specified"
 echo >&2 " then it will loop through all Accounts within the vDC stoping the vServers."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [-v <vServer Name>] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --list-vservers"
 echo >&2 " List all the vServers in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the vServers. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " If --verbose is also specified the all available vServer information will be listed."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [--verbose] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --list-vnets"
 echo >&2 " List all the vNets in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the vNets. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " If --verbose is also specified the all available vNet information will be listed."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [--verbose] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --list-distgroups"
 echo >&2 " List all the Distribution Groups in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the Distribution Groups. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " If --verbose is also specified the all available Distribution Group information will be listed."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [--verbose] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --list-volumes"
 echo >&2 " List all the Volumes in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the Volumes. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " If --verbose is also specified the all available Volumes information will be listed."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [--verbose] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --list-templates"
 echo >&2 " List all the Templates in the specified Account. If no Account is specified then it"
 echo >&2 " will loop through all Accounts within the vDC listing the Templates. To successfully"
 echo >&2 " achieve this the mandatory Username and Password must have access to all the accounts."
 echo >&2 " If --verbose is also specified the all available Template information will be listed."
 echo >&2 " "
 echo >&2 " Required parameters: -u <Account User> -p <Account Password>"
 echo >&2 " Optional parameters: [-a <Account Name>] [--verbose] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --create-vserver"
 echo >&2 " Creates a single vServer based on the information provided in the parameters. All parameters"
 echo >&2 " are name based and the ids will be found based on the provided name."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -u <Account User> -p <Account Password> -v <vServer Name> -vs-type <VServer Type Name> -vs-template <VServer Template Name> -vs-networks <Network Names> -vs-ips <Network IPs> "
 echo >&2 " Optional parameters: [-vs-dg <Distribution Group Name>] [-vs-desc <Description>] [-url <IAAS Base URL>] [-vs-script <Post Execution Script>"
 echo >&2 " "
 echo >&2 " --delete-vserver"
 echo >&2 " Deletes a single vServer based on the information provided in the parameters. All parameters"
 echo >&2 " are name based and the ids will be found based on the provided name."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -u <Account User> -p <Account Password> -v <vServer Name> "
 echo >&2 " Optional parameters: [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --stop-vserver"
 echo >&2 " Stops a single vServer based on the information provided in the parameters. All parameters"
 echo >&2 " are name based and the ids will be found based on the provided name."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -u <Account User> -p <Account Password> -v <vServer Name> "
 echo >&2 " Optional parameters: [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --start-vserver"
 echo >&2 " Starts a single vServer based on the information provided in the parameters. All parameters"
 echo >&2 " are name based and the ids will be found based on the provided name."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -u <Account User> -p <Account Password> -v <vServer Name> "
 echo >&2 " Optional parameters: [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --restart-vserver"
 echo >&2 " Restarts a single vServer based on the information provided in the parameters. All parameters"
 echo >&2 " are name based and the ids will be found based on the provided name."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -u <Account User> -p <Account Password> -v <vServer Name> "
 echo >&2 " Optional parameters: [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --create-assets"
 echo >&2 " Reads the specified Asset file and creates all the assets defined within it. If multiple"
 echo >&2 " projects are defined these are worked through. The file is processed sequentially and"
 echo >&2 " therefore must contain action in an appropriate sequence."
 echo >&2 " "
 echo >&2 " Required parameters: -f <Asset Definition File>"
 echo >&2 " Optional parameters: [-remove-ssh-key] [-url <IAAS Base URL>]"
 echo >&2 " "
 echo >&2 " --create-template"
 echo >&2 " Takes the specified vServer name and identifies the associated img files which will then"
 echo >&2 " be copied to a working directory before being opened and edited thus converting them to a"
 echo >&2 " template. If multiple images exist (because vServers uses volumes) it will be converted to"
 echo >&2 " a single template with multiple img files and hence larger size. This command must be executed"
 echo >&2 " on a physical compute node preferably cn01."
 echo >&2 " "
 echo >&2 " Required parameters: -v <vServer Name>"
 echo >&2 " Optional parameters: [-lvm <Volume Group> <Logical Volume>] [-r <Repository Directory>] [-w <Working Directory>] [-d <Destination Directory>] -keep-hosts -keep-resolv"
 echo >&2 " "
 echo >&2 " --capture-vserver"
 echo >&2 " Access the Exalogic EMOC system and retrieve the information about the specified vServer. This"
 echo >&2 " information is recorded in an Asset file that can be used with --create-assets. The script also"
 echo >&2 " takes the existing vServer image files and converts them into a template and the upload is added"
 echo >&2 " to the Asset file."
 echo >&2 " "
 echo >&2 " Required parameters: -a <Account Name> -v <vServer Name> -u <Account User> -p <Account Password> -cip <Compute Node (01) IP Address> -sip <Storage Node IP Address>"
 echo >&2 " Optional parameters: [-lvm <Volume Group> <Logical Volume>] [-r <Repository Directory>] [-w <Working Directory>] [-d <Destination Directory>] [-new-ips] [-url <IAAS Base URL>] -keep-hosts -keep-resolv [-vs-dg <Distribution Group Name>] -vs-type <Replacement VServer Type Name> "
 echo >&2 " "
 echo >&2 "Parameters "
 echo >&2 " "
 echo >&2 " -a <Account Name> Name of the Account that contains the Specified vServer."
 echo >&2 " -u <Account User> User that is allowed to access the specified account the default is root"
 echo >&2 " -p <Account Password> password of the specified user"
 echo >&2 " -v <vServer Name> vServer to be templatised or cloned."
 echo >&2 " -r <Repository Directory> Location of the repository the default is $REPOSITORY_DIR"
 echo >&2 " -w <Working Directory> Working directory where intermediate files will be copied default $WORKING_DIR."
 echo >&2 " -d <Destination Directory> Directory where the template tgz will be created. Default is $DESTINATION_DIR"
 echo >&2 " -f <Asset Definition File> (Default is CreateAssets.in)"
 echo >&2 " -vs-type <VServer Type Name> Name of the vServer Type to be used during the vServer Creation"
 echo >&2 " -vs-template <VServer Template Name> Name of the vServer Template to be used during the vServer Creation"
 echo >&2 " -vs-desc <VServer Description> Description of the vServer to be used during the vServer Creation"
 echo >&2 " -vs-networks <Network Names> Comma separated list of Network Names the vServer will be associated with"
 echo >&2 " -vs-ips <Network IPs> Comma separated list of IP Addresses, or * for automatic, associated with the network name list."
 echo >&2 " -vs-dg <Distribution Group Name> Name of the Distribution Group that the server will be placed in."
 echo >&2 " -vs-script <Post Execution Script> This script will be copied to the vServer and then executed once it has been created."
 echo >&2 " -keep-hosts If set the hosts file will not be re-initialised during template creation."
 echo >&2 " -keep-resolv If set the resolv.conf file will not be re-initialised during template creation."
 echo >&2 " -remove-ssh-key Indicates that the ssh keys should be removed"
 echo >&2 " -new-ips Indicates that the IP Address in a -capture-vserver should be replaced by * within the Asset file"
 echo >&2 " -cip <Compute Node (01) IP Address> This is the IP Address of the Compute Node that will be used to access"
 echo >&2 " the /OVS/Repository and the actual vserver image files"
 echo >&2 " -sip <Storage Node IP Address> IP Address of the Storage node that will be placed in the generated Asset "
 echo >&2 " file for the load template entry. This must be accessible from EMOC."
 echo >&2 " -url <IAAS Base URL> URL to access the EMOC interface the default is https://localhost."
 echo >&2 " -lvm <Volume Group> <Logical Volume> If the images file uses LVM then this parameter must be specified."
 echo >&2 " -verbose Displays more information for list commands."
 echo >&2 " -to-hrf Converts the verbose output to a Human Readable Form, i.e. replaces Ids with names."
 echo >&2 " -h This message."
 echo >&2 " "
 echo""
 exit 1
}

###############################################################
##
## Simple start for the script that will extract the parameters
## and call the appropriate start function.
##
###############################################################

export ACCOUNT_USER=""
export ACCOUNT_PASSWORD=""
export SYSTEMIMGDIR=/mnt/elsystem
export REMOVE_SSH_KEYS=false
export WORKING_DIR="/u01/common/images/vServerTemplatesWIP"
export DESTINATION_DIR="/u01/common/images/vServerTemplates"
export REPOSITORY_DIR="/OVS/Repositories/*"
export CN_IP_ADDRESS=""
export SN_IP_ADDRESS=""
export BACKUP=true
export VSDESCRIPTION=""
export MODIFYJEOS="modifyjeos"

while [ $# -gt 0 ]
do
 case "$1" in 
# Parameters
 -a) ACCOUNT="$2"; shift;;
 -d) DESTINATION_DIR="$2"; shift;;
 -f) ASSET_FILE="$2"; shift;;
 -p) ACCOUNT_PASSWORD="$2"; shift;;
 -r) REPOSITORY_DIR="$2"; shift;;
 -u) ACCOUNT_USER="$2"; shift;;
 -v) VSERVER="$2"; shift;;
 -w) WORKING_DIR="$2"; shift;;
 -cip) CN_IP_ADDRESS="$2"; shift;;
 -sip) SN_IP_ADDRESS="$2"; shift;;
 -url) IAAS_BASE_URL="$2"; shift;;
 -new-ips) BACKUP=false;;
 -keep-resolv) KEEP_RESOLV=true;;
 -keep-hosts) KEEP_HOSTS=true;;
 -remove-ssh-key) REMOVE_SSH_KEYS=true;;
 -lvm) LVM=true; VOL_GRP="$2"; LOG_VOL="$3"; shift; shift;;
 -vs-type) VSTYPE="$2"; shift;;
 -vs-template) VSTEMPLATE="$2"; shift;;
 -vs-desc) VSDESCRIPTION="$2"; shift;;
 -vs-networks) NETWORK_NAMES="$2"; shift;;
 -vs-ips) NETWORK_IPS="$2"; shift;;
 -vs-dg) VSDG="$2"; shift;;
 -vs-script) SCRIPT="$2"; shift;;
 -to-hrf) HRF=true;;
 -T) ROOT_SIZE="$2"; shift;;
 -S) SWAP_SIZE="$2"; shift;;
 -verbose) VERBOSE=true;;
 --verbose) VERBOSE=true;;
# Commands
 --create-vserver) CREATE_VSERVER=true;; 
 --delete-vserver) DELETE_VSERVER=true;; 
 --stop-vserver) STOP_VSERVER=true;; 
 --start-vserver) START_VSERVER=true;; 
 --restart-vserver) RESTART_VSERVER=true;; 
 --stop-vservers) STOP_VSERVERS=true;; 
 --start-vservers) START_VSERVERS=true;; 
 --reboot-vservers) REBOOT_VSERVERS=true;; 
 --status-vservers) STATUS_VSERVERS=true;; 
 --list-vservers) LIST_VSERVERS=true;; 
 --list-vnets) LIST_VNETS=true;; 
 --list-distgroups) LIST_DISTGRPS=true;; 
 --list-templates) LIST_TEMPLATES=true;; 
 --list-volumes) LIST_VOLUMES=true;; 
 --create-assets) CREATE_ASSETS=true;;
 --create-template) CREATE_TEMPLATE=true;;
 --capture-vserver) CAPTURE_VSERVER=true;;
 --generate-assets) GENERATE_ASSETS=true;;

 --test-cli) TEST_CLI=true;;

 *) usage;;
 *) break;;
 esac
 shift
done

IAAS_USER=$ACCOUNT_USER
echo "$ACCOUNT_PASSWORD" > $IAAS_PASSWORD_FILE

# Check if the JAVA_HOME is set
if [[ "$JAVA_HOME" == "" ]]
then
 export JAVA_HOME=/usr/java/latest
 echo "JAVA_HOME is not defined using $JAVA_HOME"
fi

if [[ "$CREATE_ASSETS" == "true" && "$ASSET_FILE" != "" ]]
then
 createAssets
elif [[ "$CREATE_TEMPLATE" == "true" && "$VSERVER" != "" ]]
then
 if [[ "$LVM" == "true" ]]
 then
 if [[ "$VOL_GRP" == "" || "$LOG_VOL" == "" ]]
 then
 usage
 else
 grep "^ *filter.*a/\.*" /etc/lvm/lvm.conf >/dev/null
 if [[ "$?" == "1" ]]
 then
 echo please change filter entry in /etc/lvm/lvm.conf from:
 grep "^ *filter.*r/\.*" /etc/lvm/lvm.conf
 echo to:
 echo ' filter = [ "a/.*/" ]'
 exit
 fi 
 fi
 fi
 createTemplate
elif [[ "$TEST_CLI" == "true" && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" ]]
then
 testCli
elif [[ "$CAPTURE_VSERVER" == "true" && \
 "$ACCOUNT" != "" && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" && \
 "$VSERVER" != "" && \
 "$CN_IP_ADDRESS" != "" && \
 "$SN_IP_ADDRESS" != "" ]]
then
 getAccounts
 for account in "${accountsArray[@]}"
 do
 ACCOUNT_ID=${account%%|*}
 account=${account#*|}
 ACCOUNT_NAME=${account%%|*}
 if [[ "$ACCOUNT" == "$ACCOUNT_NAME" && "$ACCOUNT_ID" == ACC-* ]]
 then
 connectToAccount
 captureVServer
 disconnectFromAccount
 fi
 done
elif [[ "$GENERATE_ASSETS" == "true" && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" ]]
then
 getAccounts
 ASSET_FILE=CreateAssets.$$.in
 for account in "${accountsArray[@]}"
 do
 ACCOUNT_ID=${account%%|*}
 account=${account#*|}
 ACCOUNT_NAME=${account%%|*}
 if [[ ("$ACCOUNT" == "" || "$ACCOUNT" == "$ACCOUNT_NAME") && "$ACCOUNT_ID" == ACC-* ]]
 then
 connectToAccount
 generateAssetsFile
 disconnectFromAccount
 fi
 done
elif [[ "$CREATE_VSERVER" == "true" && \
 "$ACCOUNT" != "" && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" && \
 "$VSERVER" != "" && \
 "$VSTYPE" != "" && \
 "$VSTEMPLATE" != "" && \
 "$NETWORK_NAMES" != "" && \
 "$NETWORK_IPS" != "" ]]
then
 simpleCreateVServer
elif [[ ("$DELETE_VSERVER" == "true" || \
 "$STOP_VSERVER" == "true" || \
 "$START_VSERVER" == "true" || \
 "$RESTART_VSERVER" == "true") && \
 "$ACCOUNT" != "" && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" && \
 "$VSERVER" != "" ]]
then
 getAccounts

 for account in "${accountsArray[@]}"
 do
 ACCOUNT_ID=${account%%|*}
 account=${account#*|}
 ACCOUNT_NAME=${account%%|*}
 if [[ ("$ACCOUNT" == "" || "$ACCOUNT" == "$ACCOUNT_NAME") && "$ACCOUNT_ID" == ACC-* ]]
 then
 connectToAccount
 if [[ "$DELETE_VSERVER" == "true" ]]
 then
 simpleDeleteVServer
 elif [[ "$STOP_VSERVER" == "true" ]]
 then
 simpleStopVServer
 elif [[ "$START_VSERVER" == "true" ]]
 then
 simpleStartVServer
 elif [[ "$RESTART_VSERVER" == "true" ]]
 then
 simpleRestartVServer
 fi
 disconnectFromAccount
 fi
 done
elif [[ ("$STOP_VSERVERS" == "true" || \
 "$START_VSERVERS" == "true" || \
 "$REBOOT_VSERVERS" == "true" || \
 "$LIST_VSERVERS" == "true" || \
 "$STATUS_VSERVERS" == "true" || \
 "$LIST_VNETS" == "true" || \
 "$LIST_DISTGRPS" == "true" || \
 "$LIST_TEMPLATES" == "true" || \
 "$LIST_VOLUMES" == "true") && \
 "$ACCOUNT_USER" != "" && \
 "$ACCOUNT_PASSWORD" != "" ]]
then
 getAccounts

 for account in "${accountsArray[@]}"
 do
 ACCOUNT_ID=${account%%|*}
 account=${account#*|}
 ACCOUNT_NAME=${account%%|*}
 if [[ ("$ACCOUNT" == "" || "$ACCOUNT" == "$ACCOUNT_NAME") && "$ACCOUNT_ID" == ACC-* ]]
 then
 connectToAccount
 if [[ "$STOP_VSERVERS" == "true" ]]
 then
 stopVServers
 elif [[ "$START_VSERVERS" == "true" ]]
 then
 startVServers
 elif [[ "$REBOOT_VSERVERS" == "true" ]]
 then
 rebootVServers
 elif [[ "$LIST_VSERVERS" == "true" ]]
 then
 listVServers
 elif [[ "$STATUS_VSERVERS" == "true" ]]
 then
 listVServerStatus
 elif [[ "$LIST_VNETS" == "true" ]]
 then
 listVNets
 elif [[ "$LIST_DISTGRPS" == "true" ]]
 then
 listDistributionGroups
 elif [[ "$LIST_TEMPLATES" == "true" ]]
 then
 listTemplates
 elif [[ "$LIST_VOLUMES" == "true" ]]
 then
 listVolumes
 fi
 disconnectFromAccount
 fi
 done
else
 usage
fi

rm -f $IAAS_PASSWORD_FILE


No comments:

Post a comment